Bosch C 60 Manual page 85

C 60 Analog and Frequency Inputs
Configuring Inputs – Multipoint Adjustment
The channel is inserted into the C 60 project tree

Channel is
linked to
ANA06
Available measurements for channel:
:
Online definition of the curve is covered in the section

'Online Measurement'
Motorsport
85
Internal | BEG/EMS1 CsM | 6/4/2010 | © Bosch Engineering GmbH 2009. All rights reserved, also regarding any disposal, exploitation,
reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Characteristic
curve for
sensor
Input pin
Pull-up
resistor is
deactivated
Adjustment
Is enabled