Table of Contents
Advertisement
C 60 Online Measurement
C 60 Online Measurement + Calibration
Group adjustment
Next, select an input pin for the trigger channel
And create a channel name for the trigger channel
Motorsport
123
Internal | BEG/EMS1 CsM | 6/4/2010 | © Bosch Engineering GmbH 2009. All rights reserved, also regarding any disposal, exploitation,
reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Note: If a low-active signal is
selected as an input channel, do not
forget to enable the pull-up resistor
for the pin. Otherwise the group
adjustment will be triggered
periodically
Advertisement
Table of Contents
