Changing Factory Settings - Electrolux T4530 Service Manual

Changing factory settings

In order to clarify things a step by step instruction of how to move within a main group fol-
lows.
Based on an example the instruction shows how to change the residual moisture factory
setting in program 4 (See Overview of factory setting Group 7).-
Start
1. Switch the user module to programming mode (See section 3).
2. Move to Area B (See "To Access Area B" in group 2 ).
3. Step forward using
4. Press Enter
5. Step forward from 7 01 using
Note! the factory setting is displayed.
6. Press Enter
Note! the factory setting flashes and is changeable.
7. Step forward using
8. Accept the setting using
flashing.
When the programming has been completed, move the switch back to normal position.
Or if further changes are to be carried out
9. Press Return
10. Press Return
11. Press Up or Down
which changes are to be carried out.
Program
to 7_ _
to enter subgroups within main groups 7 01
to 7 04 and then press Enter
P
till the setting is reached.
All values are stored when the display stops
to Subgroup 7 04.
to Main group 7 _ _.
P
depending on the Main group number in
487 22 93 40.00
487 22 93 40.00
17