Operating Panel - Electrolux T4530 Service Manual
Hide thumbs
Also See for T4530:
- Service manual (70 pages) ,
- Installation manual (44 pages) ,
- Operating manual (24 pages)
Table of Contents
Advertisement
8
operating panel
There are different types of operating panels.
On the dryer operating panel the buttons might not have any symbols in
which case they are only usable when the dryer is in service mode.
In service mode the 4 buttons are used for changing the parameters.
1
Selected temperature
Light emitting diode is lit at the selected temperature or show the default-
temperature setting.
Default temperature can be set in Group A in parameter A 05.
1
Medium
No heat
Description
High
Down
Low
Return
SELECTA CO N TRO L
Up
Enter
487 09 10 01.00
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the T4530 and is the answer not in the manual?
Questions and answers
Filter led is lit and does not let the machine work
The filter LED on the Electrolux T4530 may be lit due to high pressure in the HEPA filter, indicating a clogged or dirty filter. This applies only to Clean Room tumble dryers. To fix this issue, the HEPA filter should be replaced. Additionally, check that the prefilter and other filters in the machine are not clogged and clean or replace them if necessary.
This answer is automatically generated