Group 3 - Log - Electrolux T4530 Service Manual

20

Group 3 - Log

Readable parameters
All error codes are registered in the error log.
Beside error codes E 01 - E 18, there are a number of internal error codes which are not
displayed but only registered in the error log.
Error codes registred in the log that are not on the error code list (E 01-E 18) in this manual
should be reported to the manufacturer.
Para- Designation
meter /
group
3 01 Last error log n
3 02 Error log (n-1)
3 03 Error log (n-2)
3 04 Error log (n-3)
3 05 Error log (n-4)
3 06 Not in use
3 07 Selecta software version
3 08 Not in use
3 09 Identification of parameter part 1
3 10 Identification of parameter part 2
3 11 Production ID number
See example on the next page which shows the latest error code e08 which occurs after
220 hours of operation.
Program
Range Step Factory
setting
- info.
- info.
- info.
- info.
- info.
- info.
info.
info.
- info.
Comments
Shows last occured error and time
Second latest error code and time
Third latest error code and time
Fourth latest error code and time
Fifth latest error code and time
Software version
Identification of version
Identification of version
Identification of production data