Electrolux T4530 Service Manual page 61

E 21 - Network error, no polling CMIS
error description
The error code is displayed if the tumble dryer is connected in a CMIS system and the
computer does not communicate with the tumble dryer (no call) within 10 seconds (factory
timeout setting).
Note! This is a warning and the dryer will operate even though the error has been
activated.
error analysis
E – 21
1. Has CMIS
been started on
the PC?
2. Has the ELS
Network been
connected
correctly.
3. Has the ELS
Network been
set up correctly
reg. Baud rate,
addresses and
time out. An
address cannot
be used twice.
troubleshooting
YES
Go to step 2.
Start the CMIS
NO
program on the PC
which is connected
to the ELS Network.
YES
Go to step 3.
Mount the ELS
NO
Network cables
correctly.
Make an error
diagnosis in the
YES
CMIS system.
NO
Adjust menus 5-6-1,
5-6-2, 5-6-3.
61