Electrolux T4530 Service Manual page 62
Hide thumbs
Also See for T4530:
- Service manual (70 pages) ,
- Installation manual (44 pages) ,
- Operating manual (24 pages)
Table of Contents
Advertisement
62
E 22 - Network error, no polling CBT
error description
This error is displayed if the dryer is connected in a LM10 system and the PC does not
communicate with the dryer (no polling) within 90 sec (time out factory setting).
The error can only be removed, if communiction is re-established.
Note! It is not possible to use the dryer, however, it can be done by means of the "free
of charge key".
error analysis
E – 22
1. Has LM10
been started?
2. Has the ELS
Network been
connected
correctly.
3. Has the ELS
Network been
set up correctly
reg. Baud rate,
addresses and
time out. An
address cannot
be used twice.
troubleshooting
YES
Go to step 2.
Start the LM10
NO
which is connected
to the ELS Network
YES
Go to step 3.
Mount the ELS
NO
Network cables
correctly
Make an error
YES
diagnosis in the
LM10 system.
Mount the ELS
NO
Network cables
correctly
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
