Icom ic-80fx Instruction Manual page 10

2
PANEL DESCRIPTION
■ Front, top and side panels
D KEYPAD (Continued)
[3] • [T.SCAN](3)
➥ Numeric input and DTMF code: '3'
nput and DTMF code: '3'
➥ After pushing [FUNC](M), starts a tone scan.
(p. 23)
[4]
Numeric input and DTMF code: '4' nput and DTMF code: '4'
[5] • [SCAN](5)
➥ Numeric input and DTMF code: '5'
nput and DTMF code: '5'
➥ After pushing [FUNC](M), starts a scan. (p. 19)
[6] • [SKIP](6)
➥ Numeric input and DTMF code: '6'
nput and DTMF code: '6'
➥ After pushing [FUNC](M), sets or cancels the
skip setting. (p. 19)
[7] • [PRIO](7)
➥ Numeric input and DTMF code: '7'
nput and DTMF code: '7'
➥ After pushing [FUNC](M), starts a priority watch.
(p. 29)
[8] • [SET](8)
➥ Numeric input and DTMF code: '8'
nput and DTMF code: '8'
➥ After pushing [FUNC](M), enters the Set mode.
(p. 28)
5
[9] • [H/M/L](9)
➥ Numeric input and DTMF code: '9'
nput and DTMF code: '9'
➥ After pushing [FUNC](M), selects the output
power between high, mid and low. (p. 16)
[0] • [DTMF-M](0)
➥ Numeric input and DTMF code: '0'
nput and DTMF code: '0'
➥ After pushing [FUNC](M), enters the DTMF
memory mode. (p. 25)
[M] • [FUNC](M)
➥ DTMF code: '
DTMF code: 'M (indication: E)' '
➥ Push to access the second function of other keys.
[# ENT] • [MN.W](# ENT)
➥ DTMF code: '
DTMF code: '# (indication: F)' '
➥ After entering a channel number (0-9), push to
set the channel. (p. 15)
➥ Push to exit the Set mode or Initial Set mode.
(pp. 28, 32)