Options - Icom ic-80fx Instruction Manual

11

OPTIONS

• BP-263
BATTERY CASE
Battery case for LR6 (AA) × 6 alkaline batteries.
• BP-264 -
NI MH BATTERY PACK
7.2 V/1400 mAh (Typ.) Ni-MH battery pack. Battery life: 13 hrs.
(approximately; high power, Tx : Rx : Standby = 5:5:90)
• BP-265 -
LI ION BATTERY PACK
7.4 V/1900 mAh (Min.)/2000 mAh (Typ.) Lithium Ion battery
pack. Battery life: 18.5 hrs. (approximately.; high power, Tx : Rx
: Standby = 5:5:90)
• BC-191
DESKTOP CHARGER
For rapid charging of the Ni-MH battery pack. An AC adapter
may be supplied with the charger, depending on the version.
Charging time: approximately 2 hours for the BP-264.
• BC-192
DESKTOP CHARGER
For regular charging of the Ni-MH battery pack. An AC adapter
may be supplied with the charger, depending on the version.
Charging time: approximately 16 hours for the BP-264.
• BC-193
DESKTOP CHARGER
For rapid charging of the Li-Ion battery pack. An AC adapter
may be supplied with the charger, depending on the version.
Charging time: approximately 2.5 hours for the BP-265.
• CP-23L
CIGARETTE LIGHTER CABLE
For charging of the battery packs through a 12 V cigarette
lighter socket. (For only BC-191/BC-193)
• OPC-515L
DC POWER CABLE
For charging of the battery packs using a 12 V DC power
source instead of the AC adapter. (For all chargers)
• MB-124
BELT CLIP
Exclusive alligator-type belt clip.
39
+BC-123S
AC ADAPTER
+BC-147S
AC ADAPTER
+BC-123S
AC ADAPTER
• FA-B71V 245 MH
Z ANTENNA
The same antenna that is supplied with the transceiver.
• HM-153L -
EARPHONE MICROPHONE
Ideal for hands-free operation: clip the HM-153L (with inte-
grated PTT switch) to your lapel or breast pocket.
• HM-158L/HM-159L
SPEAKER
Combination speaker-microphone that provides convenient
operation while hanging the transceiver on your belt.
• HS-94/HS-95/HS-97
HEADSET
HS-94 : Ear hook type
HS-95 : Neck & arm type
HS-97 : Throat microphone
OPC-2004 : Allows you to connect the HS-94/HS-95/HS-97 to
the transceiver. After connecting, the VOX function
can be used.
• CS-80FX +OPC-478/OPC-478UC
CLONING SOFTWARE
Provides quick and easy programming of channels and Set
modes contents.
• OPC-474
CLONING CABLE
For transceiver-to-transceiver cloning.
Approved Icom optional equipment is designed for opti-
mal performance when used with an Icom transceiver.
Icom is not responsible for the destruction or damage to an
Icom transceiver in the event Icom transceiver is used with
equipment that is not manufactured or approved by Icom.
-
MICROPHONE
+OPC-2004
PLUG ADAPTER CABLE
CLONING CABLE