Optional) Configuring A Static Route Between An Mce And A Pe; Optional) Configuring Rip Between An Mce And A Pe - Huawei AR1200 series Configuration Manual

Huawei AR1200 Series Enterprise Routers
Configuration Guide - VPN
No.
3
4
5
6
2.4.2 (Optional) Configuring a Static Route Between an MCE and a
PE
Context
Do as follows on the MCE.
You can use a static route on a PE, and can also use RIP, OSPF, IS-IS, or BGP. For details, refer
to manuals of corresponding products.
Procedure
Step 1 Run the system-view command to enter the system view.
Step 2 Run the ip route-static vpn-instance vpn-source-name destination-address { mask | mask-
length }{ interface-type interface-number [ gateway-address ] | vpn-instance vpn-destination-
name gateway-address | gateway-address } [ preference preference ] [ track bfd-session cfg-
name ] [ description description ] command to configure a static route to a PE.
You must specify the next hop address on the local device.
----End

2.4.3 (Optional) Configuring RIP Between an MCE and a PE

Issue 01 (2012-04-20)
Data
(Optional) RIP process number, address of the network segment where
the interface bound to the VPN instance is located, type and process
number of the routing protocol run between an MCE and a site, cost
of the imported route, and name of the routing policy used during route
importing
(Optional) OSPF process number, router ID of OSPF, area ID of OSPF,
address of the network segment where the interface bound to the VPN
instance is located, type and process number of the routing protocol
run between an MCE and a site, cost of the imported route, metric of
the imported route, tag in the external LSA of the imported route, and
name of the routing policy during route importing
(Optional) IS-IS process number, NET of the IS-IS process, number
of the interface bound to the VPN instance, type and process number
of the routing protocol run between an MCE and a site, type and value
of the cost of the imported route, administrative tag of the imported
route, and level of the routing table for storing the imported route
(Optional) AS number, IP address of the interface connecting a CE and
an MCE, type and process number of the routing protocol run between
an MCE and a site, MED of the imported route, and name of the routing
policy during route importing
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 MCE Configuration
51