Optional) Configuring Is-Is Between An Mce And A Site; Checking The Configuration - Huawei AR1200 series Configuration Manual

Huawei AR1200 Series Enterprise Routers
Configuration Guide - VPN
Step 3 (Optional) Run the import-route { limit limit-number | protocol [ process-id ] [ cost cost |
route-policy route-policy-name | tag tag | type type ]
routing protocols.
If another routing protocol is run between an MCE and a PE in this VPN, you need to perform
this step.
Step 4 Run the area area-id command to create an OSPF area and enter the OSPF area view.
Step 5 Run the network address wildcard-mask [ description text ] command to enable OSPF routes
on the network segment where the IP address of the interface bound to the VPN instance belongs.
----End

2.3.5 (Optional) Configuring IS-IS Between an MCE and a Site

Context
Do as follows on the MCE.
You need to configure only routing protocols on a device in a site.
Procedure
Step 1 Run the system-view command to enter the system view.
Step 2 Run the interface interface-type interface-number command to enter the view of the interface
bound to the VPN instance.
Step 3 Run the isis enable [ process-id ] command to enable IS-IS on the interface.
By default, IS-IS is disabled on a VLANIF interface.
Step 4 Run the isis [ process-id ] vpn-instance vpn-instance-name command to create an IS-IS process
used by a VPN instance and enter the IS-IS view.
Step 5 Run the network-entity net command to configure an NET.
By default, no NET is configured for an IS-IS process.
Step 6 Run the import-route protocol [ process-id ] [ cost-type { external | internal } | cost cost |
tag tag | route-policy route-policy-name | [ level-1 | level-2 | level-1-2 ] ]
routes from other routing protocols.
If another routing protocol is run between an MCE and a PE in this VPN, you need to perform
this step.
----End

2.3.6 Checking the Configuration

Run the display ip vpn-instance [ verbose ] [ vpn-instance-name ] command on the MCE. If
you can view the route to the local VPN in the display, it means that the configuration succeeds.
Take RIP used between an MCE and a site as an example. The information is displayed as
follows:
Issue 01 (2012-04-20)
NOTE
In this step, you must specify vpn-instance vpn-instance-name.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 MCE Configuration
*
} command to import routes from other
*
command to import
49