Huawei AR1200 series Configuration Manual page 188

Huawei AR1200 Series Enterprise Routers
Configuration Guide - VPN
[ASBR2-mpls-ldp] quit
[ASBR2] interface gigabitethernet1/0/0
[ASBR2-GigabitEthernet1/0/0] mpls
[ASBR2-GigabitEthernet1/0/0] mpls ldp
[ASBR2-GigabitEthernet1/0/0] quit
# Configure basic MPLS capability on PE2 and enable LDP on the interface connecting ASBR2.
<PE2> system-view
[PE2] mpls lsr-id 4.4.4.9
[PE2] mpls
[PE2-mpls] quit
[PE2] mpls ldp
[PE2-mpls-ldp] quit
[PE2] interface gigabitethernet1/0/0
[PE2-GigabitEthernet1/0/0] mpls
[PE2-GigabitEthernet1/0/0] mpls ldp
[PE2-GigabitEthernet1/0/0] quit
After the configuration, the LDP neighbor relationship should be established between the PE
and the ASBR in the same AS. Running the display mpls ldp session command on the PE or
ASBR, you can find the session state is "Operational" in the output information.
Consider PE1 as an example.
[PE1] display mpls ldp session
LDP Session(s) in Public Network
Codes: LAM(Label Advertisement Mode), SsnAge Unit(DDDD:HH:MM)
A '*' before a session means the session is being deleted.
--------------------------------------------------------------------------
PeerID
--------------------------------------------------------------------------
2.2.2.9:0
--------------------------------------------------------------------------
TOTAL: 1 session(s) Found.
Step 3 Configure basic BGP/MPLS IP VPN on the MPLS backbone of AS 100 and AS 200 respectively.
# Configure CE1.
<CE1> system-view
[CE1] interface gigabitethernet 1/0/0
[CE1-GigabitEthernet1/0/0] ip address 10.1.1.1 24
[CE1-GigabitEthernet1/0/0] quit
[CE1] bgp 65001
[CE1-bgp] peer 10.1.1.2 as-number 100
[CE1-bgp] import-route direct
[CE1-bgp] quit
# Configure PE1 to set up the EBGP peer relationship with CE1.
[PE1] ip vpn-instance vpn1
[PE1-vpn-instance-vpn1] ipv4-family
[PE1-vpn-instance-vpn1-af-ipv4] route-distinguisher 100:1
[PE1-vpn-instance-vpn1-af-ipv4] vpn-target 1:1 both
[PE1-vpn-instance-vpn1-af-ipv4] quit
[PE1-vpn-instance-vpn1] quit
[PE1] interface gigabitethernet 2/0/0
[PE1-GigabitEthernet2/0/0] ip binding vpn-instance vpn1
[PE1-GigabitEthernet2/0/0] ip address 10.1.1.2 24
[PE1-GigabitEthernet2/0/0] quit
[PE1] bgp 100
[PE1-bgp] ipv4-family vpn-instance vpn1
[PE1-bgp-vpn1] peer 10.1.1.1 as-number 65001
Issue 01 (2012-04-20)
Status
Operational DU
NOTE
The VPN target of the VPN instances of the ASBR and the PE in the same AS should match. In different
ASs, the matching of the VPN target attributes of the PEs is unnecessary.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 BGP MPLS IP VPN Configuration
LAM SsnRole SsnAge
Passive 0000:00:02
KASent/Rcv
9/9
177