Optional) Configuring Ospf Between An Mce And A Pe - Huawei AR1200 series Configuration Manual

Enterprise routers
Hide thumbs Also See for AR1200 series:
Table of Contents

Advertisement

Huawei AR1200 Series Enterprise Routers
Configuration Guide - VPN
Context
Do as follows on the MCE.
You need to perform similar configurations on a PE. For details, refer to manuals of
corresponding products.
Procedure
Step 1 Run the system-view command to enter the system view.
Step 2 Run the rip [ process-id ] vpn-instance vpn-instance-name command to create and enable a
RIP process used by a VPN instance and enter the RIP view.
Step 3 Run the network network-address command to enable RIP routes on the network segment where
the IP address of the interface bound to the VPN instance belongs.
Step 4 (Optional) Run the import-route { { static | direct } | { { rip | ospf | isis } [ process-id ] } }
[ cost cost | route-policy route-policy-name ]
protocols.
If another routing protocol is run between an MCE and a site in this VPN, you need to perform
this step.
----End

2.4.4 (Optional) Configuring OSPF Between an MCE and a PE

Context
Do as follows on the MCE.
You need to perform similar configurations on a PE. For details, refer to manuals of
corresponding products.
Procedure
Step 1 Run the system-view command to enter the system view.
Step 2 Run the ospf [ process-id | router-id router-id | vpn-instance vpn-instance-name ]
to create an OSPF process used by a VPN instance and enter the OSPF view.
Step 3 (Optional) Run the import-route { limit limit-number | protocol [ process-id ] [ cost cost |
route-policy route-policy-name | tag tag | type type ]
routing protocols.
If another routing protocol is run between an MCE and a site in this VPN, you need to perform
this step.
Step 4 Run the area area-id command to create an OSPF area and enter the OSPF area view.
Step 5 Run the network address wildcard-mask [ description text ] command to enable OSPF routes
on the network segment where the IP address of the interface bound to the VPN instance belongs.
----End
Issue 01 (2012-04-20)
NOTE
In this step, you must specify vpn-instance vpn-instance-name.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
*
command to import routes from other routing
*
} command to import routes from other
2 MCE Configuration
*
command
52

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ar3200 series

Table of Contents