Huawei AR1200 series Configuration Manual page 367
Enterprise routers
Hide thumbs
Also See for AR1200 series:
- Configuration manual (342 pages) ,
- User configuration manual (232 pages) ,
- Hardware description (218 pages)
Table of Contents
Advertisement
Huawei AR1200 Series Enterprise Routers
Configuration Guide - VPN
Run the display nhrp peer all command on the hub, and the command output is as follows.
[Huawei] display nhrp peer all
-------------------------------------------------------------------------------
Protocol-addr
-------------------------------------------------------------------------------
172.16.1.101
-------------------------------------------------------------------------------
Tunnel interface: Tunnel0/0/0
Created time
Expire time
-------------------------------------------------------------------------------
Protocol-addr
-------------------------------------------------------------------------------
172.16.1.102
-------------------------------------------------------------------------------
Tunnel interface: Tunnel0/0/0
Created time
Expire time
Step 6 Run the ping command on the spoke.
If you enable Spoke1 and Spoke2 to ping each other, you can see that Spoke1 and Spoke2 have
learned NHRP mapping entries from each other.
Run the display nhrp peer all command on Spoke1, and the command output is as follows.
[Huawei] display nhrp peer all
-------------------------------------------------------------------------------
Protocol-addr
-------------------------------------------------------------------------------
172.16.1.1
-------------------------------------------------------------------------------
Tunnel interface: Tunnel0/0/0
Created time
Expire time
-------------------------------------------------------------------------------
Protocol-addr
-------------------------------------------------------------------------------
172.16.1.102
-------------------------------------------------------------------------------
Tunnel interface: Tunnel0/0/0
Created time
Expire time
Run the display nhrp peer all command on Spoke2, and the command output is as follows.
[Huawei] display nhrp peer all
-------------------------------------------------------------------------------
Protocol-addr
-------------------------------------------------------------------------------
172.16.1.1
-------------------------------------------------------------------------------
Tunnel interface: Tunnel0/0/0
Created time
Expire time
-------------------------------------------------------------------------------
Protocol-addr
-------------------------------------------------------------------------------
172.16.1.101
-------------------------------------------------------------------------------
Tunnel interface: Tunnel0/0/0
Created time
Expire time
-------------------------------------------------------------------------------
Protocol-addr
-------------------------------------------------------------------------------
172.16.1.102
-------------------------------------------------------------------------------
Issue 01 (2012-04-20)
Mask
NBMA-addr
32
44.3.1.2
: 2008.01.07-18:07:45
: 2008.01.07-20:07:52
Mask
NBMA-addr
32
44.4.1.2
: 2008.01.07-18:11:51
: 2008.01.07-20:11:57
Mask
NBMA-addr
32
44.1.1.1
: 2011.08.18-15:10:26
: --
Mask
NBMA-addr
32
44.4.1.2
: 2011.08.18-16:09:31
: 2011.08.18-18:09:31
Mask
NBMA-addr
32
44.1.1.1
: 2011.08.18-15:12:53
: --
Mask
NBMA-addr
32
44.3.1.2
: 2011.08.18-16:10:33
: 2011.08.18-18:10:33
Mask
NBMA-addr
32
44.4.1.2
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
NextHop-addr
Type
172.16.1.101
dynamic
NextHop-addr
Type
172.16.1.102
dynamic
NextHop-addr
Type
172.16.1.1
static
NextHop-addr
Type
172.16.1.102
dynamic
NextHop-addr
Type
172.16.1.1
static
NextHop-addr
Type
172.16.1.101
dynamic
NextHop-addr
Type
172.16.1.102
dynamic
6 DSVPN Configuration
Flag
route tunnel
Flag
route tunnel
Flag
hub
Flag
route tunnel
Flag
hub
Flag
route tunnel
Flag
local
356
Hide quick links:
Advertisement
Table of Contents
