Configuring Route Reflection For Bgp Ipv4 Vpn Routes - Huawei AR1200 series Configuration Manual
Enterprise routers
Hide thumbs
Also See for AR1200 series:
- Configuration manual (342 pages) ,
- User configuration manual (232 pages) ,
- Hardware description (218 pages)
Table of Contents
Advertisement
Huawei AR1200 Series Enterprise Routers
Configuration Guide - VPN
l
----End
3.15.4 Configuring Route Reflection for BGP IPv4 VPN routes
The premise of enabling BGP VPNv4 route reflection is that the RR has established the MP-
IBGP connections with all its clients (PEs).
Issue 01 (2012-04-20)
The interface is specified as an interface to establish the TCP connection. The interface
IP address must be the same as the MPLS LSR ID. It is recommended to specify a
loopback interface to establish the TCP connection.
5.
Run:
ipv4-family vpnv4
The BGP VPNv4 address family view is displayed.
6.
Run:
peer group-name enable
The capability of exchanging IPv4 VPN routes between the RR and the peer group is
enabled.
7.
Run:
peer ip-address group group-name
The peer is added to the peer group.
Configuring the RR to establish an MP IBGP connection with each client PE
1.
Run:
system-view
The system view is displayed.
2.
Run:
bgp as-number
The BGP view is displayed.
3.
Run:
peer ipv4-address as-number as-number
The client PE is specified as the BGP peer.
4.
Run:
peer ipv4-address connect-interface interface-type interface-number
The interface is specified as an interface to establish the TCP connection.
The interface IP address must be the same as the MPLS LSR ID. It is recommended
to specify a loopback interface to establish the TCP connection.
5.
Run:
ipv4-family vpnv4
The BGP VPNv4 address family view is displayed.
6.
Run:
peer ipv4-address enable
The capability of exchanging VPNv4 routes between the RR and the client PE is
enabled.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 BGP MPLS IP VPN Configuration
138
Hide quick links:
Advertisement
Table of Contents
