Info Menu - Epson EH-LS10000 User Manual

Configuration Menu
• Each time the CAPS key is selected and the
case letters.
• Each time the SYM1/SYM2 key is selected and the
the section enclosed by the frame.
The following types of character can be entered.
Numbers
Letters
Symbols
c
•
You cannot use colons (:) for Network menu items.
•
You cannot use spaces for Network menu items.
•
The following four characters cannot be entered using the soft keyboard. Enter these characters using
a Web browser.
" * , ;

Info menu

Function
Operation Hours
Source
Input Signal
Resolution
Scan Mode
Refresh Rate
3D Format
Sync Info
Deep Color
Video Signal
Status
Serial Number
Version
button is pressed, it sets and changes between upper case and lower
0123456789
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
! # $ % & ' ( ) + - . / < = > ? @ ` ^ _ { | } ~
p.81
s
Displays the cumulative operating time.
Displays the source name for the connected equipment currently being projec-
ted.
Displays the content of Input Signal set in the Signal menu according to the
source.
Displays the resolution.
Displays the scan mode.
Displays the refresh rate.
Displays the 3D format of the signal input during 3D projection (Frame Pack-
ing, Side by Side, or Top and Bottom).
Displays the image signal information.
This information may be needed if service is required.
Displays deep color.
Displays the settings for Video Signal in the Settings menu.
This is information about errors that have occurred on the projector.
This information may be needed if service is required.
Displays the projector's serial number.
Displays the firmware version of the projector.
button is pressed, it sets and changes the symbol keys for
Explanation
99