Hiding The Image Temporarily - Epson EH-LS10000 User Manual

Hide thumbs Also See for EH-LS10000:
Table of Contents

Advertisement

Basic Operations
Input Image
Notes
*
The letterbox image used in this explanation is a 4:3 aspect ratio image displayed in 16:9 with black margins at
the top and bottom for subtitle placement. The margins at the top and bottom of the screen image are used for
subtitles.
With this projector you can also set Anamorphic Wide and Horiz. Squeeze.
Set Anamorphic Wide and attach a commercially available anamorphic lens to enjoy DVDs, Blu-rays, and so
on of images recorded at Cinema Scope size.
Horiz. Squeeze stretches the horizontal aspect of the input signal. This allows you to project across the full
width of the screen when using a commercially available anamorphic lens.
c
If Anamorphic Wide is selected when Overscan is set, the image may be truncated. Set Overscan to
Off and then project.
When projecting 3D images in Anamorphic Wide, only 1080p/24 Hz/frame packing signals are
supported.
When a 4K image signal is being input, you can only select Normal, Anamorphic Wide, and Horiz.
Squeeze.

Hiding the Image Temporarily

You can use this to temporarily hide the image on the screen.
Press the
button to show or hide the image.
EH-LS10000
c
Because moving images continue to play even when they are hidden, you cannot return to the point
at which you hid the images using the
If the
button is pressed while the Configuration menu is displayed, the menu is temporarily
hidden, and
If you press the
confirmation message is displayed asking if you want to turn off the projector. Press the
again to turn off the projector.
Normal
Matches the vertical size
of the projection panel.
The aspect ratio differs
depending on the input
image.
Signal - Advanced - Overscan
s
is displayed at the top-right of the screen.
button on the remote control or the control panel while the image is hidden, a
Setting Name (Aspect)
Full
Uses the entire projection
panel.
p.88
EH-LS9600W
button.
36
Zoom
Retains the aspect ratio of
the input signal, and
matches the horizontal
size of the projection pan-
el. The top and bottom of
the image may be trunca-
ted.
button

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eh-ls9600w

Table of Contents