Epson EH-LS10000 User Manual page 93

Configuration Menu
Function
Lock Setting Lens Lock
Child Lock
Control Panel Lock
Front, Front/Ceiling, Rear, Rear/Ceiling
Projection
*2
User Button 2D-to-3D Conversion, 3D Depth, Inverse
3D Glasses, Power Consumption, Detail
Enhancement, Info
Picture in Pic- -
*3
ture
Standby Mode Communication On, Communication Off
Menu/Settings
On, Off
On, Off
On, Off
92
Explanation
When set to On, the focus, zoom, and lens shift
settings are locked at their current settings.
If you press the button when Lens Lock is
set to On, is displayed on the screen.
This locks the button on the projector's con-
trol panel to prevent children from turning on
the projector by accident. You can turn on the
power when locked by holding down the
button for approximately three seconds. You can
still turn off the device using the
perform operations with the remote control as
usual.
If changed, this setting is enabled after you pow-
er off the projector and the cool-down process is
complete.
Note that even if Child Lock is set to On, the pro-
jector still turns on when the power cord is con-
nected if Direct Power On is set to On.
When set to On, all buttons on the control panel
except for the button are disabled.
displayed on the screen if any buttons are press-
ed. To unlock, press and hold the
the control panel for at least 7 seconds.
If changed, this setting is enabled once you close
the Configuration menu.
Change this setting depending on how the pro-
jector is installed.
•
Front: Select if you are projecting in front of the
screen.
•
Front/Ceiling: Select if you are projecting in
front of the screen suspended from the ceiling.
•
Rear: Select if you are projecting to a rear screen
from the back.
•
Rear/Ceiling: Select if you are projecting to a
rear screen from the back when the projector is
suspended from the ceiling.
Select a Configuration menu item to assign to the
button on the remote control. By pressing
the button, the assigned menu item se-
lection/adjustment screen is displayed, allowing
you to make one-touch settings/adjustments.
Starts the Picture in Picture display.
When set to Communication On, you can make
settings and control the projector over the net-
work even when the projector is in standby sta-
tus.
button, or
is
button on
p.79
s