Wearing And Viewing With The 3D Glasses; Range For Viewing 3D Images - Epson EH-LS10000 User Manual

Basic Operations

Wearing and viewing with the 3D Glasses

a
Turn on the 3D Glasses by sliding the
[Power] switch to On.
The indicator turns on for several seconds,
and then turns off.

Range for Viewing 3D Images

This projector allows you to view 3D images within the range shown in the figure below.
You can view 3D images within a range of 10 m from the projector.
c
•
3D images may not be displayed correctly if there is any interference from other Bluetooth
communication devices. Do not use these devices at the same time.
•
The communication method for 3D Glasses uses the same frequency (2.4 GHz) as wireless LAN
(IEEE802.11b/g) or microwave ovens. Therefore, if these devices are used at the same time, radio wave
interference may occur, the image may be interrupted, or communication may not be possible. If you
do need to use these devices at the same time, make sure there is enough distance between them and
the projector.
•
The 3D Glasses use the active shutter system based on the standards provided by the Full HD 3D Glasses
™
Initiative .
b
Put on the 3D Glasses and enjoy the
show.
c
•
When you have finished using the
3D Glasses, turn them off by
sliding the [Power] switch to Off.
•
If the 3D Glasses are not used for
at least 30 seconds, they turn off
automatically. To turn the 3D
Glasses back on, slide the
[Power] switch to Off, and then
slide it back to On.
•
You need more pairs of 3D
Glasses if more than one person
will be viewing the 3D image.
s
42
p.116