Problems With Hdmi; Problems With Wirelesshd (Eh-Ls9600W Only) - Epson EH-LS10000 User Manual
Hide thumbs
Also See for EH-LS10000:
- Quick start manual (8 pages) ,
- Manual (12 pages) ,
- User manual (135 pages)
Table of Contents
Advertisement
Troubleshooting
The 3D image is enlarged and truncated
Check
Is the correct 3D video format set?
Problems with HDMI
HDMI Link does not function
Check
Are you using a cable that meets the HDMI
standards?
Does the connected device meet the HDMI
CEC standards?
Are the cables connected correctly?
Is the power for the amplifier or DVD/Blu-ray
disc player and so on turned on?
Was a new device connected, or was the con-
nection changed?
Are many multi-media players connected?
The device name is not displayed under Device Connections
Check
Does the connected device meet the HDMI
CEC standards?
Problems with WirelessHD (EH-LS9600W only)
Cannot project WirelessHD images
Check
Does the cable connecting the supplied Wire-
lessHD Transmitter meet the HDMI stand-
ards?
Is WirelessHD set to Off?
Video may be truncated if an incorrect 3D format is set. Set the
correct 3D format.
p.37
s
Only high-speed HDMI cables are supported.
If the connected device does not meet the HDMI CEC standards,
it cannot be operated even if it is connected to the HDMI port.
See the documentation and so on supplied with the connected
device for more information.
Also, press the
button, and then check if the device is
available under Device Connections.
Check that all the cables required to use HDMI Link are securely
connected.
p.60
s
Put each device in standby status. See the documentation and
so on supplied with the connected device for more information.
If the CEC function for a connected device needs to be set again,
for example when a new device is connected or the connection
is changed, you may need to restart the device.
Up to 3 multi-media players that meet the HDMI CEC standards
can be connected at the same time.
If the connected device does not meet the HDMI CEC standards,
it is not displayed. See the documentation and so on supplied
with the connected device for more information.
If the cable does not meet the HDMI standards, operations are
not possible.
When WirelessHD is set to Off from the Configuration menu,
projection is not possible for WirelessHD input signals. Set Wire-
lessHD to On, and then press the
WirelessHD - WirelessHD
111
Remedy
Remedy
p.60
s
Remedy
Remedy
button.
s
p.91
Settings -
Advertisement
Table of Contents
