Remote Control Operating Range; Switching The Input And Output; Switching The Target Image - Epson EH-LS10000 User Manual

Useful Functions
c
•
The wireless transmission range varies depending on the placement and material of the surrounding
furniture and walls. The values given here are for your reference only.
•
The projector cannot communicate through walls.
•
Place the WirelessHD Transmitter on a wooden shelf or other location that does not block the signal
from being transmitted from the front of the device. Note that placing the transmitter on a metal shelf
and so on may cause signal instability.
•
The antennas are built-into the front of the projector and the WirelessHD Transmitter. Make sure the
antennas face each other (face the front) when setting up the devices.
•
When checking operations, place the projector and the WirelessHD Transmitter close to each other,
and make sure there are no other projectors operating in the vicinity.
•
Depending on the reception strength, the image's color information may be automatically discarded
to avoid any interruptions and maintain a constant connection. To avoid any deterioration in image
quality, adjust the position of the WirelessHD Transmitter so that the Reception is as strong as possible.

Remote Control Operating Range

The following shows the operating range between the remote control and the WirelessHD Transmitter.
Operating range (left to right)

Switching the Input and Output

With the WirelessHD Transmitter, you can connect and switch between up to five multi-media players (input
devices to be played back) and one monitor device (a monitor device displaying an image, such as a television).

Switching the target image

You can switch between a monitor device, such as a television, connected to the Output port on the
WirelessHD Transmitter and the projector.
a
Turn on the projector or the monitor device, such as a television.
b
Turn on the WirelessHD Transmitter.
The indicator on the WirelessHD Transmitter turns on.
t
Operating range (top to bottom)
75