Epson EH-LS10000 User Manual page 123

Appendix
Settings - Standby Mode - Communication On
p.91
s
*4 For EH-LS10000, the HDMI1 port supports HDCP 2.2, and the HDMI2 port supports HDCP 1.4. For EH-LS9600W,
both ports support HDCP 1.4.
Angle of tilt
If you use the projector tilted at an angle of more than 3°, it could be dam-
aged or cause an accident.
ESC/VP21 commands
Use of ESC/VP21 enables control of the projector from an external device. For more details, see the following
Web site.
http://www.epson.com
RS-232C cable layouts
•
Connector shape: D-sub 9-pin (male)
•
Projector input port name: RS-232C
•
Signal name:
Signal Name
GND
TD
RD
<At the projector>
<At the projector>
•
Communications protocol
Default baud rate setting: 9600 bps
Data length: 8 bit
Parity: None
Stop-bit: 1 bit
Flow control: None
Function
Signal wire ground
Transmit data
Receive data
(PC serial cable)
122
<At the computer>
<At the computer>