Problems With The Control Panel; Problems With 3D Images - Epson EH-LS10000 User Manual

Troubleshooting
Check
Are the batteries dead or have the batteries
been inserted correctly?
Is the remote control pointed at the Wire-
lessHD Transmitter when operating the WiHD
Transmitter buttons?
(EH-LS9600W only)

Problems with the control panel

Cannot make settings on the control panel
Check
Is Control Panel Lock set to On?

Problems with 3D images

Cannot project correctly in 3D
Check
Are the 3D Glasses turned on?
Is a 3D image being projected?
Is the input image in 3D?
Is 3D Display set to Off?
Is the correct 3D format set?
Are you viewing within the reception range? Check the range within which the 3D Glasses can communicate
Has pairing been performed correctly?
Are there any devices that cause radio wave
interference in the vicinity?
Make sure the batteries are inserted correctly or replace the bat-
teries with new ones if necessary.
Make sure you point the remote control at the WirelessHD Trans-
mitter when using the WiHD Transmitter buttons on the remote
control. p.75
s
If Control Panel Lock is set to On from the Configuration menu,
all of the control panel buttons except for the
disabled. Perform operations from the remote control.
tings - Lock Setting - Control Panel Lock
Turn on the 3D Glasses.
If the projector is projecting a 2D image, or if an error occurs on
the projector that prevents the 3D image from being projected,
you cannot view 3D images even if you are wearing the 3D
Glasses.
Check that the input image is 3D compatible.
Since most TV broadcasts do not contain a 3D format signal, 3D
reception must be set manually.
If 3D Display is set to Off from the Configuration menu, the pro-
jector does not automatically change to 3D even when a 3D im-
age is input. Press the
Display p.88
The projector automatically selects the appropriate 3D format,
but if the 3D image is not displayed correctly, use 3D Format
from the Configuration menu to select another format.
nal - 3D Setup - 3D Format
with the projector, and view within that range.
See the User's Guide for the 3D Glasses to perform pairing.
When using other devices at the same time with the frequency
band (2.4 GHz) such as Bluetooth communication devices, wire-
less LAN (IEEE802.11b/g), or microwave ovens, radio wave inter-
ference may occur, the image may be interrupted, or communi-
cation may not be possible. Do not use the projector near these
devices.
110
Remedy
p.25
s
Remedy
button are
p.91
Remedy
button. Signal - 3D Setup - 3D
s
p.88
p.42
s
Set-
s
Sig-
s