Setting
ECO Display
Reset
Parent topic:
Projector Information Display - Info Menu
You can display information about the projector and input sources by viewing the Info menu. However,
you cannot change any settings in the menu.
Note: Available settings depend on the current input source. The lamp usage timer does not register any
hours until you have used the lamp for at least 10 hours.
Information item
Projector Info
Version
Options
On
Off
—
Adjusting the Menu Settings
Description
See the table below
Displays the projector's firmware version
Description
Displays a leaf icon in the bottom
left corner of the projected screen
to indicate the power-saving
status when the lamp brightness
changes
Resets all settings in the ECO
menu to their defaults
153