PowerWedge 10 Installation
Installing a Magnetic Stripe Reader (MSR)
Figure 5. PowerWedge 10 Input Connectors (both models)
Drawing not to scale
2—connect primary
INPUT
magnetic stripe reader
11
Both connectors on the PowerWedge 10 Wedge and PowerWedge 10
Serial can accept input from magnetic stripe readers. However,
optimized for bar code readers. Attach your magnetic stripe reader to
2 (see
). If you are using two MSRs, connect the primary one
INPUT
Figure 5
2 and the other one to
to
INPUT
For information about programming parameters for magnetic stripe read-
ers, see page 33.
1.
INPUT
1—connect bar
INPUT
code reader or second
magnetic stripe reader
PowerWedge
1 is
INPUT
®
10