Bar Code Symbologies; Input Devices And Connectors - PSC PowerWedge 10 User Manual

About the PowerWedge 10

Bar Code Symbologies

NOTE

Input Devices and Connectors

NOTE
3
The PowerWedge 10 recognizes and decodes the following symbologies:
• Codabar/Ames
• Code 11
• Code 128
• Code 39, including:
- Extended ASCII
- MIL-STD-1189
• Code 93
• EAN-8/13
• Interleaved 2 of 5
The symbologies listed above were supported at the time this user's guide
was printed. Additional symbologies may also be supported, while some of
the symbologies listed may be discontinued. Please contact your dealer or
Customer Service for current information.
The PowerWedge 10 decodes input from any of the following devices on
input connector 1:
• Wands (visible light and infrared)
• Handheld laser scanners
• Handheld charge-coupled device scanners (CCDs)
• Magnetic stripe readers (MSRs)
• I.D. badge readers
For installation information, see
Input connector 1 can also be used for both input and output of cloning data
(see page 24).
• JAN-8/13
• Labelcode 4/5
• Matrix 2 of 5
• MSI
• Standard 2 of 5
• UPC-A
• UPC-E
• UPC/EAN/JAN extensions
PowerWedge 10 Installation on page 5
.
®
PowerWedge 10