Table of Contents
Advertisement
PowerWedge 10 Installation
NOTE
7
On Macintosh computers, the keyboard connectors are called Apple Desktop
Bus (ADB) ports. They are marked with the following icon:
3. Attach the small male plug of the cable to the keyboard input jack
on the computer or terminal. Attach the female plug of the cable to
the keyboard cable or port (see
style connectors, attach the cable plug to the computer or terminal,
and plug the jack from the keyboard into the socket on the cable
connector.)
4. Plug your bar code scanner into the connector labeled
the PowerWedge 10 (see
5. Move the switch on the PowerWedge 10 to the
6. Turn on the computer or terminal. The decoder should beep, and
the green LED (light-emitting diode) should light up.
7. Scan the programming bar code for the type of computer or termi-
nal you are using. (The bar codes for host devices start on page 79.)
You can now begin using the PowerWedge 10.
). (For cables with telephone-
Figure 2
).
Figure 1
PowerWedge
1 on
INPUT
position.
ON
®
10
Advertisement
Table of Contents
