Serial Installation
Figure 3. Connecting the PowerWedge 10 Serial decoder to a standalone PC
Drawing not to scale
This figure shows cable number 00-874-04. Your computer or
terminal may require a different cable.
NOTE
User's Guide
(Model FD-000-10)
1. Turn your computer or terminal off.
2. One plug on the serial cable is labeled with the cable number.
Attach that plug to the connector labeled
PowerWedge 10 (see
shows cable number 00-874-04. Your computer or terminal may
Figure 2
require a different cable.
On Macintosh computers, attach the smaller cable connector to the modem
port. The modem port is marked with the following icon:
).
Figure 3
Connect to serial port on
computer or terminal
Power adapter
PowerWedge 10 Installation
on the
HOST INTERFACE
8