Keyboard Wedge Installation; (Model Fd-000-11) - PSC PowerWedge 10 User Manual

Keyboard Wedge Installation

Figure 2. Connecting the PowerWedge 10 Wedge
Drawing not to scale
Cable number 00-001-00 is shown. Your computer or terminal
may require a different cable.
User's Guide

(Model FD-000-11)

1. Turn your computer or terminal off, and unplug the keyboard.
2. The largest plug on the cable is labeled with the cable number.
Attach that plug to the jack labeled
Wedge 10 (see
Figure 2
Female plug—connect to
keyboard cable or port
PowerWedge 10 Installation
HOST INTERFACE
).
on the Power-
Male plug—connect to
keyboard input jack on
computer or terminal
6