Powerwedge 10 Installation - PSC PowerWedge 10 User Manual

PowerWedge 10 Installation

NOTE
5
PowerWedge 10
The PowerWedge 10 comes in two models (see page 2). The model num-
ber is printed on the label on the bottom of the unit. Follow the installa-
tion procedure for your model.
The interface cable you need to use with the PowerWedge 10 depends on
which model you have and the type of computer or terminal you are connect-
ing it to. Be sure you have the correct cable before beginning the installation.
(Contact your dealer or Customer Service for more information about cables.)
Installation
®
PowerWedge 10