Table of Contents
Advertisement
Figure 6. Main menu for on-screen programming
User's Guide
should beep three times, and the on-screen programming menu
should appear on your screen, as shown in
***** POWERWEDGE 10 VER X.X MAIN MENU *****
BAR CODEMAG. STRIPECOMMUNICATIONS
---------------------------------
0 CODE394 CHANNEL 1 & 2C HOST SELECTION
0 I2of5
1 M2of55 CA DL CONVERT
1 S2of5D DEFAULTS
1 CODE11D MORE CONTROLS
2 CODABAR/AMES
2 MSIE SHOW/EXIT
2 CODE93B OTHER CONTROLSE CLONING
3 UPC-A
3 UPC-E
3 EAN/JAN
4 CODE128
5 LCODE-4/5
USE BACKSPACE TO EXIT MODES
(0-E):
The menu is arranged in categories and subcategories identified by
numbers and letters. Two or more categories or subcategories can
share a single number or letter; for example, Code 39 and Inter-
leaved 2 of 5 both use 0 (zero).
The last line of the menu prompts you for input.
4. Type the I.D. of the category or subcategory you want to display or
change, and press
parameter settings for Codabar bar codes. This will also display the
parameters and settings for the other symbologies having 2 as an
I.D., as shown in
Programming the PowerWedge 10
. For example, enter 2 to display the current
Enter
.
Figure 7
.
Figure 6
20
Advertisement
Table of Contents
