SLAVE
SOUND
○
3 Button:
MENU
DOWN
UP
ENTER
○
4 Mains output: Connect to supply mains power to other units.
○
5 Mains input: Connect to power supply.
○
6 Microphone: Receives the sound to control the unit
○
7 Only for remote control: Connect to the 1/4'' microphone jack to control the unit in Stand by
and Mode functions.
○
8 DMX input: For DMX512 link, use 3/5‐pin XLR plug cable to input DMX signal
○
9 DMX output: For DMX512 link, use 3‐pin XLR plug cable to link the next unit..
○
10 Safe Ring: For attached the safe cable.
3.2Main Function
To select any of the given functions, press the MENU button to show the required option on the
display. Select the function with the ENTER button and the display will blink. Use the DOWN and
UP buttons to change the mode. Once the required mode has been selected, Press the ENTER
button to store. To go back to the main menu without any changes press the MENU button. Hold
and press the MENU button about one second or wait for one minute to exit the menu mode. The
main functions are shown below:
On
Slave Mode
Flashing
Sound activation
To select the programming functions
To go backward in the selected functions
To go forward in the selected functions
To confirm the selected functions
4A