Fig.4
Explanation of fig.5:
Base 40°C
001
Md.1 16Ch
Lamp 30°C
6.2 Main Function
Turn on the unit, press MENU button into menu mode, press UP and DOWN button until the
required function is shown on the monitor. Select the function by ENTER button. Use UP
and DOWN button to choose the submenu, press the ENTER button to store and
automatically return to the last menu. Press MENU button or let the unit idle one minute to
exit menu mode.
In the event of disconnecting with mains power, press UP button for one minute to enter
into menu mode. Press MENU button or let the unit idle one minute to exit.
The main functions are shown below(the grayed boxes are preset settings:
Present temperature of base CPU is 40°C
Present start address
Present channel mode is mode 1 (16 channels mode)
Present temperature of lamp is 30°C
Warning signal blinking direct resetting error
XP-700WZA
Fig.5
12A