Main Function - ACME LED-ST50 User Manual

16. ONLY FOR REMOTE CONTROL:
Connecting with CA-8 to control the unit for Stand by,
Function and Mode function.
17. DMX INPUT:
For DMX512 link, use 3-pin XLR cable to link the unit together.
18. DMX OUTPUT:
For DMX512 link, use 3-pin XLR plug cable to link the next unit.

3.2 Main Function

To select any of the given functions, press the MENU button up to when the required one is
showing on the display. Select the function by ENTER button and the display will blink. Use DOWN
and UP button to change the mode. Once the required mode has been selected, press the ENTER
button to confirm, to go back to the main function without any change press the MENU button
again. Hold and press the MENU button about one second or wait for 7 seconds to exit the current
mode.
The main functions are showing below:
6A