Main Function - ACME LITE PANEL 900 LP-900 WW BD30 User Manual

POWER
3. Button:
MENU
DOWN
UP
ENTER
4. Dimmer Adjust knob: Adjusts the lightness for the unit;
5. DMX OUT: DMX 512 link, use a 3/5-pin XLR cable to link to the next unit;
6. DMX IN DMX 512 link, use a 3/5-pin XLR cable to link the unit to a DMX controller;
7. POWER OUT: Connects to the next unit;
8. POWER IN: Connects to mains supply power.

3.2 Main Function

To select any of the given functions, press the MENU button up to the required selection as shown
on the display. Select the function with the ENTER button and the display will blink. Use the
DOWN/UP buttons to change the mode. Once the required mode has been selected, press the
ENTER button to confirm. To go back to the main functions without any changes press the MENU
button again. Press and hold the MENU button for about one second or wait for 7 seconds to exit
the current mode.
The main functions are shown below:
On Power On
To select the programming functions
To go backward in the selected functions
To go forward in the selected functions
To confirm the selected functions
5