Subscribe to Our Youtube Channel
Related Manuals for ACME LED-192RGB
Summary of Contents for ACME LED-192RGB
-
Page 1: Table Of Contents
LED-192RGB TABLE OF CONTENTS 1. Safety Instructions 2. Technical Specifications 3. Main Function 4. How to control the fixture 5. DMX 512 Configuration 6. DMX 512 Connections 7. Troubleshooting 8. Fixture Cleaning User Manual Please read the instructions carefully before use... -
Page 2: Technical Specifications
1. Safety Introductions 2. Technical Specifications It can be operated by DMX512 control or can be used as an individual unit without controller. Please read the instructions carefully which includes important It can be linked together as many as required in master/slave mode, and perform the information about the installation, operation and maintenance. - Page 3 change the mode. Once the required mode has been selected, press ENTER button to button, Use DOWN and UP button to select the setup or it will automatically return to the main functions without any change after idling 10 (Slave Mode Normal, 1, 2, 3, and 4). press ENTER button to setup or automatically seconds.
-
Page 4: How To Control The Fixture
jack will have nothing plugged into it, and Its master LED will be constantly on and sound return to the main functions without any change after 10 seconds. Back to the functions without any change press MENU button again. LED will flash to the music. The other units will have to set in slave mode and select (normal) or (2 light show) or... -
Page 5: Dmx512 Configuration
Blackout Blackout the unit Function Strobe White Dimmer Sh 0 Sh 11 Sound Chase/Strobe (LED OFF) Mode (LED ON) LED Slow 5. DMX512 Configuration Connect the fixture together in a “daisy chain” by XLR plug cable from the output of the fixture to the input of the next fixture. -
Page 6: Fixture Cleaning
DMX polarity. 3. If you have intermittent DMX signal problems, check the pins on connectors or on PCB of the fixture or the previous one. EC - Declaration of Conformity 4. Try to use another DMX controller. 5. Check if the DMX cables run near or run alongside to high voltage cables that may We declare that our products (lighting equipments) comply with the following cause damage or interference to DMX interface circuit.
Need help?
Do you have a question about the LED-192RGB and is the answer not in the manual?
Questions and answers