@
User
if nec. j
Configuration
Outgoing calls
Busy when dialling = No
Yes
Save & exit
Allowing "Busy When Dialing"
If you activate this function, an incoming call received while you are dialing is re-
jected. The caller then hears the busy signal.
z
You can also configure this setting via the WEB interface
Press the key shown.
Select and confirm the option shown.
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
m
Select and confirm the option shown.
l
Select and confirm the option shown.
l
91
page 160.
Need help?
Do you have a question about the CP200 and is the answer not in the manual?