Rejecting A Call - Unify CP200 User Manual

Deflect to DSS Yes
=
Save & exit
Reject?
Deflecting to a DSS number
or
A call can be deflected to a direct station selection (DSS) subscriber using the
DSS key, if the key is configured and the deflect function is activated by your ad-
ministrator page 114.

m
Information only, as set by the administrator: Yes or No.
Select and confirm the option shown.
l

Rejecting a call

You can reject an incoming call.
ñ
"Reject" must be authorized by the administrator.
An incoming call is displayed or signaled.
Select and confirm the option shown.
f
The caller hears a busy signal.
If the rejected caller's phone number is transmitted, it is saved in the call
list. You can then call this party back at a later time.
71