Activating Or Deactivating Immediate Call Forwarding - Unify CP200 User Manual

56
ß
Accept?
Set a forwarding destination

Activating or deactivating immediate call forwarding

Prerequisite: Ideally you have configured the key for "Variable call forwarding"
(see page 67). Otherwise you can configure the settings for call forwarding

via the user menu (
you can use the following enhanced functions.
_ Press the function key to open forwarding.
Deactivating call forwarding
If call forwarding was activated for Uncond'l , it will now be automatically deac-
tivated
Activating forwarding to last destination
or
The pop-up menu opens. The message:
"Set forward on to" is displayed with the number of the last forwarding destina-
tion and you have the following additional options:
• Accept
• Set a forwarding destination
• Edit call forwarding
• Cancel
Using last forwarding destination
Select and confirm within three seconds to reuse the last saved forwarding des-
l
tination for Uncond'l. Call forwarding to this destination is immediately activated
for All Calls and the key for "Variable call forwarding" illuminates.
If you do not confirm Accept immediately, call forwarding is activated automati-
cally after a short time.
Activating with variable destination phone numbers
or
If you want to use a new forwarding destination:
Select and confirm the option shown within 3 seconds.
f
j
Enter and confirm the new destination phone number.
or
Confirm the last destination phone number saved (it will be displayed).
Call forwarding to the selected destination is immediately activated for Un-
cond'l and for All Calls and the key for "Variable call forwarding" illuminates.
page 72). It is recommended to configure the key so that
