Zaxcom QRX235 User Manual page 6

Zaxcom QRX235
Side
Channel 1 Group
Channel 2 Group
Side Mounted LEDs - The LEDs give you visual indication if RF and / or audio is being received by the
QRX. The LED settings are adjusted in the extended menu. There are three LEDs per group. There is
Channel 3 Group
one group for each channel. The group to the top represents channel one, the group below is
channel 2, the next group is channel 3, and the group on the bottom is channel 4.
The LED modulation colors are as:
Channel 4 Group
ZaxNet Antenna Connector - SMA connector When the QRX has the QIFB option installed this is
where the ZaxNet antenna will be connected
When the signal hits -40 dBFS
When the signal hits -20 dBFS
When the signal hits -10 dBFS
When the signal hits - 8 dBFS
When the signal hits - 5 dBFS
6
ZaxNet
Antenna SMA
C t
Side