Working With Images; Saving An Image; General; Image Capacity - FLIR T6xx series User Manual

15

Working with images

15.1 Saving an image

15.1.1 General

You can save an image directly, without previewing the image first.

15.1.2 Image capacity

This table gives information on the approximate number of infrared (IR) and digital cam-
era (DC) images that can be saved on memory cards:
IR only
Card size
1450
1 GB
2 GB 2900

15.1.3 Naming convention

The naming convention for images is one of the following:
• IR_xxxx.jpg, where xxxx is a unique counter.
• Date.

15.1.4 Procedure

Follow this procedure:
1. To save an image directly, push the Autofocus/Save button.
Note
You can change the function of the Autofocus/Save button under
ces. The function can be set to one of the following:
• Preview/Save (Brief depression = Preview; Long depression = Save).
• Save directly (default setting)
• Always preview

15.2 Previewing an image

15.2.1 General
You can preview an infrared image (full infrared, fusion, picture-in-picture) or a digital
photo before you save it to a memory card. This enables you to see if the image or photo
contains the information you want before you save it.
In preview mode, you can also manipulate the image before you save it, and add annota-
tions in order to simplify report generation.
15.2.2 Procedure
Follow this procedure:
1. To preview an image, briefly push and release the Autofocus/Save button.
Note
This is not the default setting of the camera and requires that you change the behavior of the but-
ton. See below for instructions.
#T559598; r. AB/ 9443/9443; en-US
IR + DC + 30 seconds
IR + DC voice annotation
600 450
1200 900
(Mode) > Settings > Preferen-
35