Changing The Viewfinder's Eyecap - FLIR T6xx series User Manual

14 Handling the camera
3. Push the joystick. This will display a Mode menu.
4. On the Mode menu, select Settings and push the joystick.
5. Go to the Camera tab.
6. On the Camera tab, select Calibrate touchscreen and push the joystick.
7. Click Start.
8. Calibrate the touchscreen by tapping the five crosshairs that appear on the screen
using the stylus pen.

14.14 Changing the viewfinder's eyecap

CAUTION
Applicability: Cameras with a viewfinder.
Make sure that the beams from the intensive energy sources do not go into the viewfinder. The beams
can cause damage to the camera. This includes the devices that emit laser radiation, or the sun.
Note
This item is subject to camera model.
Follow this procedure:
1. Take a firm grip around the uppermost part of the eyecap.
2. Pull out the eyecap from its mount.
3. Note the grooves on the eyecap and the eyecap mount.
#T559598; r. AB/ 9443/9443; en-US
33