Table of Contents
Advertisement
6
Transportation and Storage
-
Avoid impacts
-
Check the equipment regarding possible damages at the packaging or the camera
-
Store the camera in its original packaging and in a dry and weatherproof place un-
til installation
-
Avoid exposing the equipment to extreme heat or cold
7
Installation
The national regulations and accepted rules of technology are decisive for the installation
and operation of the camera. Before installation, check the camera for possible damages
to the housing and cables. Installation, electrical connection, and start-up should only be
carried out be qualified personnel.
Attention!
External heat and/or cold sources should be taken into account during
installation. The permissible temperature range should not be exceed-
ed
Attention!
The connecting cable has to have a minimum length of 1 meter. The
connecting cable has to be laid shielded and in a protected manner
Attention!
When using the ExCam in the mining sector with a "high" risk of me-
chanical danger, it is mandatory to protect the transparent parts
(glass) of the device (accessory)!
Doc.-ID: 140721-PT08BAU-SS-Ex Installation Manual rev.03 (1st Supplement), page 14 of 52
Advertisement
Table of Contents
