Native Instruments MASCHINE STUDIO Getting Started page 23

3. Press Button 1 or Button 2 above the displays to select GROUPS.
By selecting this, a list of Groups will become visible on the right display.
4. Check that Button 4 above the displays is not fully lit and that the
is not highlighted — if necessary, press Button 4 to disable it.
This will now allow us to select only Native Instruments factory content.
5. Turn Knob 5 until Kits
6. Turn Knob 6 until
right display to the kits of that sub-type.
7. Turn the jog wheel (the bigger knob with a bright LED ring on the right of your controller)
or Knob 8 (under the right display) to scroll down the list until
is selected, so that only drum kits are shown on the right display.
Urban Kit is selected, this will further reduce the results list on the
Loading a Drum Kit from the Factory Library
USER label underneath
EK-TL A KIT is selected.
MASCHINE STUDIO - Getting Started - 23
First Steps