Native Instruments MASCHINE STUDIO Getting Started page 83

Adding a Bass Line
Accessing the Plug-in Parameters
The Control area indicating which parameters are displayed.
The large part of the Control area to the right is called the Parameter area. This gives you ac-
cess to the desired parameters:
The parameters for the Sound "Analovue."
These parameters are organized into pages that you can select for displaying by clicking the
little labels at the top of the Control:
The pages allow you to display further parameters for your plug-in.
On each page, you can click and drag the knobs to adjust the corresponding parameters.
Example
As an example, let's adjust the amplification level of the second oscillator in our "Analovue"
preset. Do the following:
MASCHINE STUDIO - Getting Started - 83