Selecting Another Group - Native Instruments MASCHINE STUDIO Getting Started

5.1

Selecting Another Group

Until now, we have only used the first Group available in our Project. Groups are labeled from
A1 to H1. We will now select another Group and load a bass Sound into it. Loading the bass
into a different Group slot will later allow us to handle it separately, and easily combine it with
the existing drum kit Group and its Patterns.
In MASCHINE it is possible to have more than one Group bank! In this tutorial we will
only be working with Group bank 1. Each Group bank contains 8 groups, and when a
new bank is created the groups in each bank will be labeled sequentially; e.g. The
Groups in Group bank 2 will be labeled
detailed information on creating and selecting additional Group banks please refer to
the Manual.
5.1.1 Selecting Another Group in the MASCHINE Software
In the top part of the MASCHINE window, click the name of the desired
►
lect it.
Click the Group slot's name to select that slot.
Upon selection, the Pattern Editor below switches to display the content of the newly selected
Group slot. For now, this is still empty (no Sounds, no Patterns).
A2 to H2 and Group bank 3
MASCHINE STUDIO - Getting Started - 69
Adding a Bass Line
Selecting Another Group
A3 to H3. For more
Group B1 to se-