Native Instruments MASCHINE STUDIO Getting Started page 114

2. While holding SCENE, hit pad
Pad 2 lights up brightly to confirm its selection.
Pad 1 turns half lit, indicating that Scene 1 is not currently selected.
3. Release the SCENE
Scene 2 is now selected. If the sequencer is playing, you won't hear anything because
→
this Scene is still empty.
Now we can select one Pattern in each Group to include in this new Scene:
1. Press the desired Group button
2. Press PATTERN + the desired pad to select the Pattern you want to use in Scene 2.
Upon selection, a Clip referencing this Pattern is automatically inserted into Scene 2.
By repeating these two steps for all Groups you want to use in this Scene, you progres-
→
sively build up a new Scene.
You might also want to remove a Clip from the selected Scene:
To remove the Clip for the selected Group from the selected Scene, press
►
Button 2 (REMOVE).
The Clip is removed from the Scene. You will note that the corresponding Pattern is still
→
there.
Don't forget that you can at any time press
2 to select Scene 2.
button.
A–H to select a Group you want to use in Scene 2.
UNDO or REDO to undo/redo your actions!
MASCHINE STUDIO - Getting Started - 114
Creating a Song Using Scenes
Creating Clips in the Arranger
PATTERN +