Save Your Work; To Sum Up - Native Instruments MASCHINE STUDIO Getting Started

Your second kick takes place under the first kick in the Sound slot 2. It will now be trig-
→
gered by the pad 2
In a similar manner, we will now move the "Snare Ektl A 1" to pad 5:
1. Click and hold the Sound slot 3, which now contains the "Snare Ektl A 1."
2. While holding the mouse button, drag your mouse down. When the insertion line appears
above the other snare, release the mouse button.
Your first snare takes place above the second snare in the Sound slot 5. It will now be
→
triggered by pad 5
Keep in mind that any change in the Sound slot positions also affects the pads trigger-
ing the corresponding Sounds! Hence, we recommend you practice with your new map-
ping to avoid confusion.
3.3

Save Your Work!

Again, it is recommended to regularly save your work. You can then open another Project or
close MASCHINE and take a break. Your tutorial Project will be recalled as is the next time you
open it.
To save your work in the MASCHINE Software:
Press [Ctrl] + [S] ([Cmd] + [S] on Mac OS X) to save your Project.
►
To save your work using the Controller:
Press SHIFT + ALL
►
3.4

To Sum Up...

In this tutorial, we have learned to:
▪ Open a Project using the Browser (both on your controller and in the software).
on your controller.
on your controller.
to save your Project.
Building Your Own Drum Kit
MASCHINE STUDIO - Getting Started - 53
Save Your Work!