Native Instruments MASCHINE STUDIO Getting Started page 167

(2) PASTE button: Press the
(3) NOTE button: Press the
by one semitone per increment. Hold press and turn the jog wheel to change the selected
events by one octave.
(4) NUDGE button: Press the
one step per increment. Press
(5) CLEAR button: Press the
events are selected) are deleted. Pressing
tions for the selected Sound.
(6) QUANTIZE button: Press the
if no events are selected) to the step grid. Press
lected events (or all events if no events are selected) 50% to the step grid.
(7) REDO button: Press
step.
(8) UNDO button: Press
step.
(9) Jog wheel: By default you can use the jog wheel to scrub through a track according to the
setting of the Pattern Grid
can use the jog wheel to scrub though the track 1 bar at a time. Hold
wheel to scrub through the track one step at a time. When your controller is in Browse mode or
when you browse plug-in lists, turn the jog wheel to scroll through the list and press it to load
the selected entry. When TUNE,
tune, swing or volume control, respectively. Switch between TUNE,
ing the FUNCTION arrow buttons.
(10) ENTER button: Press the
project. See the BACK
allow you to quickly navigate your project.
(11) FUNCTION buttons: Press the left and right
TUNE, SWING and VOLUME
these buttons are equal to one increment of the jog wheel when scrubbing through a song.
PASTE button to paste selected events.
NOTE button and turn the jog wheel to change the selected events
NUDGE button and turn the jog wheel to move the selected events
SHIFT+NUDGE for finer increments.
CLEAR button to clear the selected events (or all events if no
SHIFT
QUANTIZE button to quantize the selected events (or all events
REDO to redo your last action. Press
UNDO to undo your last action. Press
(PATTERN + turn Knob 2), for example, if this is set to 1 BAR, you
SWING or VOLUME
ENTER button to move one step forward in the hierarchy of a
button (10) for more information. These buttons used in combination
functions when pressing a pad or Group button. When unlit,
+ CLEAR (CLR AUTO) will delete all modula-
SHIFT + QUANTIZE (50%)to quantize the se-
SHIFT + REDO
SHIFT + UNDO
SHIFT
are active (lit), the jog wheel acts as a
SWING
FUNCTION buttons to select between the
MASCHINE STUDIO - Getting Started - 167
Quick Reference
MASCHINE Hardware Overview
to redo your last
to undo your last
and turn the jog
or VOLUME by us-