Table of Contents
Advertisement
3
Advanced Configuration
3.1.3
The Analytics function of the FC-Series ID camera provides the capability to detect motion and
classify detected objects as Human, Vehicle, or Object of Interest based on size and aspect ratio
(height and width).
Note
Objects of interest are detected objects that do not quite match the human or vehicle aspect ratio,
but move through the scene uniformly. For example, a deer, bus, or oversized truck.
Using the Setup menu Analytics page, create motion detection areas (4), or tripwire lines (4), or
analytics masking areas (4). Each detection area or tripwire has independent detection settings (any
combination of vehicle, human, or object of interest). When enabled, these detection areas provide
alarm signals to the camera software which can take an action locally (such as taking a snapshot or
sending an email) or can send an alarm to other systems or devices. Use the Maintenance menu, to
define the actions resulting from each alarm condition
Analytics page
Use this page to set up areas (or regions) for analysis. In some situations it may also be useful to use
multiple regions (up to four) to include (or exclude) different areas in the scene and to set area-
specific detection parameters. The Analytics page allows the user to add four areas and four
tripwires. Each area/tripwire is assigned an Alarm ID number (1 to 8) based on the order in which
they are created and the available IDs. If an area is deleted, its Alarm Id will be available for reuse.
427-0089-00-12 Version 100
Video Analytics Setup
Add Areas
(Alarm Manager, pg.
Global Settings
July 2016
54).
Calibrate
45
Advertisement
Table of Contents
